| Aqua – the alternative
| |
 | Instead of the oil
primer, you can also use the mild-scented, water-based Aqua Hard primer for
floors No. 127. The result is the same
as with PurSolid oil, but the colour tone is more natural. |
 | The primer
is applied evenly to the sanded surface with a roller. Allow 24 hours for
drying. This is followed by intermediate sanding with the single-disc machine
(grain 120 – 150).
|
 | A Special
primer No. 117 is available for woods rich in content such as oak, cherry and
chestnut. It is spread smooth with the machine and a polishing pad.
|
  | With the
Aqua system, subsequent treatment with Floor wax No. 187 is necessary. Apply in
a thin layer and do not polish until you have waited at least 20 minutes and at
most one hour using the polishing pad on the single-disc machine.
A further
wax application will increase the gloss. The surface can be used after 24 hours
and final hardness is reached after about 2 weeks. |
